Trucking

Cargo Tie Down Equipment Catalogue

4" Nylon Strap Irons

Click here to see PRICE LIST
Morgan Manufacturing, Inc.

SR-16A/SR-16G

  • 13 1/2" across, 6 3/4" over hang
  • Used for sheet rock and soft lumber

SR-16A Corner Iron

  • 1.25 lbs. each
  • .100" thick aluminum

SR-16G Corner Iron

  • 16 gauge galvanized steel
  • 2.25 lbs. each
  • Also available in 14 gauge steel - specify part number SR-14G (Non stock item, call for quote)

SLP-76G Corner Iron

Morgan Manufacturing, Inc.
  • 5" across, 2 5/8" over hang
  • 12 gauge galvanized steel
  • .75 lbs. each
  • Ideal where load and strap protection is needed on a small bearing surface

SQ-1612 Corner Iron

Morgan Manufacturing, Inc.
  • 12" across
  • 16 gauge galvanized steel
  • 2.25 lbs.each
  • Over hang 7" and 5" on either side of edge
  • For sheet rock and soft lumber

Cargo Tie Down Equipment Catalogue

Custom Galvanized Steel or Aluminum Vee Boards & Corner Irons
Rope, Cable and Chain Irons & Plastic Corner Protectors
Corner Iron Organizer

Click here to see PRICE LIST

Custom Galvanized Steel or Aluminum Vee Boards

Morgan Manufacturing, Inc.
  • Give us your specifications and we'll custom design a load protector to meet your needs
  • Lengths can vary in size up to eight feet
  • Materials can be galvanized steel or aluminum
  • Prices are based on quantity, material and size

Vee Boards

Morgan Manufacturing, Inc.
  • SR series Vee Boards with two holes drilled
  • 24”, 36”, 48”, 72’ and 96” in length
  • Available in .100 thick aluminum or 14 gauge galvanized steel
  • Specify SR-length and material type. Example: SR-36A is 36” long of aluminum. SR-36G is 36” long of Galvanized Steel (non-stock item, call for quote)
  • Overhang 7” and 5” on either side
  • Used extensively for loose loads like stacked bricks, rolled roofing paper and filled cardboard boxes
  • Designed for use with EL-3 Easy Lift with two lifting studs, works in conjunction with the two holes in the Vee Boards to provide a safe way to place the Vee Boards on the load without climbing up on the load
Morgan Manufacturing, Inc.
  • VB series slotted Vee Boards with one lifting slot
  • 24”, 36”, 48”, 72’ and 96” in length
  • Available in .100 thick aluminum or 14 gauge galvanized steel
  • Specify VB-length and material type. Example: VB-24A is 24” long of aluminum. VB-24G is 24” long of Galvanized Steel (non-stock item, call for quote).
  • Overhang 7” and 5” on either side
  • Used extensively for loose loads like stacked bricks, rolled roofing paper and filled cardboard boxes
  • Designed for use with EL-4 Easy Lift with one lifting stud, works in conjunction with the one lifting slot in the Vee Boards to provide a safe way to place the Vee Board on the load without climbing up on the load

Cargo Tie Down Equipment Catalogue

Harvest Bin Corner Iron, Weld-On Corner Iron Hook & Placement Tool

Click here to see PRICE LIST

FBI-34 Harvest Bin Corner Iron

Morgan Manufacturing, Inc.
  • Harvest Bin Corner Iron
  • 34" long x 5" angles
  • 12 Ga. steel construction
  • 10 lbs. each
Morgan Manufacturing, Inc.
  • Placing cable on corner hook
Morgan Manufacturing, Inc.
  • Heavy duty box hook

WH-1F Hook Fork

Morgan Manufacturing, Inc.
  • For placement of FBI-34 Harvest Bin Corner Iron and cable
  • Can be used to place cable on corner iron hooks
  • Standard broom handle female threads

WH-1 Weld-On Hook

Morgan Manufacturing, Inc.
  • Cast steel weld-on cable hook for harvest box corner iron

Cargo Tie Down Equipment Catalogue

Rope, Cable and Chain Irons

Click here to see PRICE LIST

P-1 Corner Iron

Morgan Manufacturing, Inc.
  • 6" across, 3" over hang
  • 12 gauge galvanized steel
  • 1 lb. each
  • Use with chain or cable
  • Universally used to protect your load, cable and rope
  • Harvest Bin Corner Iron

FBI-34 Harvest Bin Corner Iron

Morgan Manufacturing, Inc.
  • Harvest Bin Corner Iron
  • 35" long x 5" angles
  • 12 Ga. steel construction 34" long x 5" angles
  • 10 lbs. each

WH-1F Hook Fork

Morgan Manufacturing, Inc.
  • For placement of FBI-34 Harvest Bin Corner Iron and cable
  • Standard broom handle female threads

WH-1 Weld-On Hook

Morgan Manufacturing, Inc.
  • Cast steel weld-on cable hook for harvest box corner iron

Cargo Tie Down Equipment Catalogue

Plastic Corner Protectors

Click here to see PRICE LIST

EP-48 Plastic Corner

Morgan Manufacturing, Inc.
  • High strength polyethylene
  • Light weight
  • Long lasting and REUSABLE
  • Eliminate breaking, chipping or cracking of valuable cargo
  • Can be easily cut down in one foot increments to the width you need
  • Stock length 48", weight 1 1/2 lbs.
  • Overhang of 3.5” on both sides

EP-12 Plastic Corner

Morgan Manufacturing, Inc.
  • 12-inch plastic Edge Protector/Vee Board protects the load and your straps at the same time.
  • Used extensively for sheet rock, soft lumber, and similar loads.
  • Overhang of 3.5" on both sides
  • 3/16" thick
  • Made of high-strength polyethylene
  • Lightweight and reusable

1088PCP Plastic Corner Protector

Morgan Manufacturing, Inc.
  • 10.75” x 8” x 8”
  • Lightweight made from HDPE
  • Slotted skirts allow a 4” strap to pass through
  • Perfect for insulated steel panels, sheet rock, sheet metal, steel fabricated products, etc. that require product and/or strap protection

SCP Plastic Vee Boards

Morgan Manufacturing, Inc.
  • Available in 14”, 24”, 39” & 48” lengths. Specify part number: SCP-14, SCP-24, SCP-39 or SCP-48
  • 8.25” overhang each side
  • Made from high performance polymer
  • Protects the corners of your cargo
  • Reduces the wear on your straps
  • Weather resistant
  • Doesn’t easily crack
  • Cost effective
  • Stacks efficiently

TG-1MAG Magnetic Tarp Guard

Morgan Manufacturing, Inc.
  • Made in the U.S.A.
  • Protects truck tarps from sharp corners

Model B Plastic Corner

Morgan Manufacturing, Inc.
  • Heavily reinforced bearing area
  • Extra large ears prevent strap from sliding off
  • Extended ribs for extra strength
  • Side slot for up to four inch straps

TG-1 Tarp Guard

Morgan Manufacturing, Inc.
  • Designed to fit over sharp corners on the load to protect the tarps from damage
  • Place Tarp Guard on the load under the tarp, then secure tarp in your normal manner

Cargo Tie Down Equipment Catalogue

Custom Galvanized Steel or Aluminum Vee Boards & Corner Irons
Rope, Cable and Chain Irons & Plastic Corner Protectors
Corner Iron Organizer

Click here to see PRICE LIST

EL-2 Easy Lift

Morgan Manufacturing, Inc.
  • For edge protectors 2’ wide and less
  • For use on the P-1, SLP-76, Model B, PCP-5, PCP-12 & SCP-14, 1088PCP

EL-3 Easy Lift

Morgan Manufacturing, Inc.
  • Two lifting studs for use on SR series Vee Boards with two holes

EL-4 Easy Lift

Morgan Manufacturing, Inc.
  • One lifting stud for use on VB series slotted Vee Boards

ELEP-48 Extension Pole

Morgan Manufacturing, Inc.
  • 48-inch pole extends to 96 inches.
  • Secure pin locking mechanism won't slip or collapse in use.
  • Fiberglass with aluminum extending rod
  • Standard "broom handle" style male threads fit our EL-2, EL-3, EL-4 Easy Lifts and WH-1F Vertical Corner Iron Placement Tool

WH-1F Hook Fork

Morgan Manufacturing, Inc.
  • For placement of FBI-34 Harvest Bin Corner Iron and cable
  • Standard broom handle female threads

Cargo Tie Down Equipment Catalogue

Miscellaneous Tie-Down Items

Click here to see PRICE LIST

SCR230FH 2” x 30’ Ratchet Strap Assembly with Flat Hooks

Morgan Manufacturing, Inc.
  • 30 feet of 2" wide strapping with flat hooks on both ends of strapping. Patented self-contained ratchet mechanism allows the use of as much or as little of the strap as needed while the rest of the webbing is secured and stored safely behind the ratchet.
  • Our built-in handle makes it easy to wind up the webbing when you are through using the strap. This allows for the complete assembly to be stored neatly after each use.
  • 10,000 lb. rated capacity
  • Working load limit of 3,665 lbs.
  • Holds up to 30' of adjustment
  • Webbing is easy to replace

SCR230WH 2” x 30’ Ratchet Strap Assembly with Wire Hooks

Morgan Manufacturing, Inc.
  • 30 feet of 2" wide strapping with wire hooks on both ends of strapping. Patented self-contained ratchet mechanism allows the use of as much or as little of the strap as needed while the rest of the webbing is secured and stored safely behind the ratchet.
  • Our built-in handle makes it easy to wind up the webbing when you are through using the strap. This allows for the complete assembly to be stored neatly after each use.
  • 10,000 lb. rated capacity
  • Working load limit of 3,665 lbs.
  • Holds up to 30' of adjustment
  • Webbing is easy to replace

EZ-Strap Adjustable Bungee Strap

Morgan Manufacturing, Inc.
  • Easily transformed into four different un-stretched sizes as needed (11.5”, 17”, 22.5” and 28” from end of one hook to the end of the other)
  • Stretch sizes range from 15”, 22”, 34” and 44” lengths
  • To adjust the length simply remove the hook from its present position and place into one of the other three positions
  • Strap is made from a high quality EPDM rubber formula with sun resistant inhibitors impregnated in the rubber to resist the suns ultra-violet rays, thus resisting breakdown.

WCE-1 Wheel Chock w/eye bolt

Morgan Manufacturing, Inc.
  • Weather-resistant rubber wheel chock to prevent rolling during maintenance or loading.
  • Eyebolt can be used to link two chocks together or attached to a chain to deter theft.
  • Textured base provides extra grip
  • Heavy-duty eyebolt
  • High-quality UV-resistant rubber

TSNR-15 and 31 Natural Rubber Tarp Straps

Morgan Manufacturing, Inc.
  • 15” & 31” Natural rubber tarp straps
  • These straps are used to hold tarps securely in place by providing high tensile strength and constant tension.
  • Available in 2 sizes : 15" and 31" in packs of 10 or 50.
  • Natural rubber straps are best for use in cooler climates. Check out our EPDM (Synthetic) Rubber Straps for warmer climates.
  • Tensile strength
  • Good resistance to weather and UV radiation
  • Excellent aging properties

MADE IN SRI LANKA

TSEPDM-15 and 31 EPDM Tarp Straps

Morgan Manufacturing, Inc.
  • 15” and 31” EPDM tarp straps
  • These straps are used to hold tarps securely in place by providing high tensile strength and constant tension. Available in 2 sizes : 15" and 31" in packs of 10 or 50.
  • EPDM (synthetic) rubber straps are best for use in warmer climates. Check out our Natural Rubber Straps for cooler climates.
  • High tensile strength
  • Good resistance to weather and UV radiation
  • Excellent aging properties

MADE IN SRI LANKA

O-1 Corner Iron Organizer

Morgan Manufacturing, Inc.
  • 8" long, 1/10 lb. each
  • 3/16" diameter galvanized wire
  • Used to string corner irons with holes in them. Saves time and money because drivers don't have to dig through the equipment boxes to find their irons.
  • Used also to tie up loose chain from chain binding

Cargo Tie Down Equipment Catalogue

Combination Winch & Chain Binder Bars

Click here to see PRICE LIST

Winch Bars: BB-1S, MEB-4

meb4
  • Angled chrome-moly steel tip to get that extra quarter turn on the winch
  • "PINCH" and "FLARE" on the end of the tip prevents slipping out of winch holes while pulling
  • Knurled hand grip
  • BB-1S is 36" in overall length, weighs 6 lbs. and is "HEAT TREATED". Orange and silver in color.
  • MEB-4 is a strong basic bar for the economy minded, weighing 5.5 lbs. Solid orange in color.

Combination Winch and Chain Binder Bars: BB-2S, BB-2SL

bb2s
  • Chain binder release on one end with winch tip on the other end
  • Knurled hand grip
  • Angled tip made of hardened chrome-moly steel
  • "FLARE" on the end of the tip prevents slipping out of winch holes while pulling
  • BB-2S is 34" in overall length, 6.3 lbs. each
  • BB-2SL is 42" in overall length, 7.3 lbs. each
  • Both bars are "HEAT TREATED." Orange and silver in color.

Flared Winch Tip

Screenshot 2022-06-23 140754
  • "Flared" winch tip prevents slipping out of winch holes.
  • THIS REDUCES ON THE JOB INJURIES.

Chain Binder End

Screenshot 2022-06-23 140826
  • Strong one piece cast steel construction.
  • A specially designed chain binder end allows the user to maneuver the bar on or off a tightened load binder easily because of its unique design.

Winch Bar Warning Label

  1. Always Stand Aside from the winch bar to prevent injury in case of slippage or severe chain binder "Kick" upon opening.
  2. When tightening or loosening winches, always maintain control with a firm grip on the winch bar.
  3. When adjusting strap tension, be sure winch sprocket and pawl are fully engaged before releasing pressure on a winch bar.
  4. Do not use a bar extender or "cheater" in addition to the winch bar.
  5. Use combination bars only to release chain binders which have tightened excessively due to load shifting. Do not use a bar to tighten chain binders. Chainbinders should be tightened by hand only.
  6. Failure to comply with above safety recommendations may result in serious personal injury to yourself or those around you!

Suggested List Price Schedule as of August 2, 2023

LOAD PROTECTIVE IRONS - For use with Chains, Cables and Ropes Cost each
P-1   Standard 6 inch Corner Iron from 12 gauge Galv. Steel - 1 lb. each $5.67
LOAD PROTECTIVE IRONS - For use with Truck and Ratchet Straps  
SR-16G   16 Gauge Galv. Steel - 2.25 lbs. each   $18.12
SQ-1612   16 gauge Galv. Steel - 2.25 lbs. each   $12.53
SLP-76G   12 gauge Galv. Steel formed for Nylon Strap - .75 lbs. each    $8.53
 
VEE BOARDS - For use with Truck and Ratchet Straps  
SR-24G   2 foot long Vee Board - 14 gauge Galv. Steel - 5.50 lbs. each $58.60
SR-24A   2 foot long Vee Board with two lifting holes- .100 thick Aluminum - 2.50 lbs. each $45.66
SR-36A   3 foot long Vee Board with two lifting holes- .100 thick Aluminum - 4.25 lbs. each  $61.10
SR-48A   4 foot long Vee Board with two lifting holes - .100 thick Aluminum - 4.75 lbs. each  $69.52
SR-48P   4 foot long Vee Board - Heavy Duty Plastic - 3-1/2" x 5" overhang - 2.5 lbs. each $34.48
SR-72A   6 foot long Vee Board with two lifting holes - .100 thick Aluminum - 7.50 lbs. each  $123.09
SR-96A   8 foot long Vee Board with two lifting holes - .100 thick Aluminum - 10.75 lbs. each $138.49
EP-12   1 foot long Plastic Vee Board - 3/16" thick, 3-1/2" x 3-1/2" overhang - .38 lbs. $10.91
EP-48   4 foot long Plastic Vee Board - 3/16" thick, 3-1/2" x 3-1/2" overhang - 1.5 lbs. $39.44
VB-24A   2 foot long Vee Board with one lifting slot - .100 thick Aluminum - 2.50 lbs. each   $45.66
VB-36A   3 foot long Vee Board with one lifting slot - .100 thick Aluminum - 4.25 lbs. each   $61.10
VB-48A   4 foot long Vee Board with one lifting slot - .100 thick Aluminum - 4.75 lbs. each    $69.52
VB-72A   6 foot long Vee Board with one lifting slot - .100 thick Aluminum - 7.50 lbs. each   $123.09
VB-96A   8 foot long Vee Board with one lifting slot - .100 thick Aluminum - 10.75 lbs. each   $138.49
SR-3926A   Brick Board – Aluminum, 39” wide x 26” overhang x 5” on top lip   $253.40
SCP-14   14" Plastic Vee Board - 8.25 x 8.25 overhang - 1.485 lbs.
   $15.98
SCP-24   24" Plastic Vee Board - 8.25 x 8.25 overhang - 2.43 lbs.   $22.50
SCP-39    39" Plastic Vee Board - 8.25 x 8.25 overhang - 4.02 lbs.   $36.14
SCP-48    48" Plastic Vee Board - 8.25 x 8.25 overhang - 4.90 lbs.   $37.66
 
WINCH BARS  
BB-1S   Super Winch Bar - 36" long - 6 lbs. each - Painted orange & silver  $73.54
BB-2S   Combo Super Winch Bar - 34" long - 6.3 lbs. each - Painted orange & silver $87.22
BB-2SL   Combo Extra Long Bar - 42" long - 7.5 lbs. each - Painted orange & silver $108.57
MEB-4   Economy Bar - 32" long - 5.5 lbs. each - Painted orange $69.77
MEB-4S   Harvest Bin Corner Iron, 34” – 10 lbs $70.41
 
ITEMS FOR TRUCKERS  
EL-2   Easy Lift - For edge protectors 2' wide and less - 2.25 lbs. each   $56.82
EL-3   Easy Lift - Two lifting studs for two hole Vee Boards- 1.5 lbs. each   $65.89
EL-4   Easy Lift - One lifting stud for slotted Vee Boards- 1.5 lbs. each    $43.18
ELEP-48   Easy Lift Extension Pole 4' to 8' - 2 lbs. each    $60.48
FBI-34   Harvest Bin Corner Iron, 34" - 10 lbs. each (Other lengths available for quote)    $114.16
Model B    4" Plastic Corner - .25 lbs. each   $4.12
1088PCP   10.75” x 8.5” x 8.5” Plastic Corner – 11.6 oz.   $10.74
O-1   Corner Iron Organizer "Safety Pin" - 3.5 oz. each   $4.48
SCR230FH   2" x 30' Self Contained Ratchet Strap Assembly with Flat Hooks - 6.99 lbs. each    $50.26
SCR230WH  2" x 30' Self Contained Ratchet Strap Assembly with Wire Hooks - 6.84 lbs. each   $50.26
EZ-STRAP   Adjustable Bungee Strap - .25 lbs. each    $3.80
TG-1   Tarp Guard - .18 lbs. each   $7.59
TG-1MAG   Magnetic Tarp Guard - .25 lbs. each    $10.49
WH-1   Weld-On Cable Hook - .69 lbs. each    $6.23
WH-1F   Corner Iron Installation Fork - .21 lbs. each (Fits WH-1 Weld-On Cable Hook)    $35.01
WCE-1   Wheel Chock W/Eye Bolt    $16.43
10 Pack 50 Pack
TSEPDM-15  15" EPDM Tarp Strap  $2.23 ea. $1.76 ea.
TSEPDM-21  21" EPDM Tarp Strap  $4.55 ea. $3.05 ea.
TSEPDM-31 31" EPDM Tarp Strap $3.30 ea. $2.74 ea.
TSNR-15 15" Natural Rubber Tarp Strap $1.66 ea. $1.54 ea.
TSNR-21 21" Natural Rubber Tarp Strap $4.33 ea. $2.83 ea.
TSNR-31  31" Natural Rubber Tarp Strap $2.47 ea. $2.07 ea.

Distributor's List as of October 1, 2019

Please select the state for which you wish to see the distributors

Alabama

Alabama

DAWSON TARP
2617 - 24TH ST. NO.
BIRMINGHAM AL 35234
(800) 428-8277

 Arizona

Arizona

UTILITY TRAILER
8710 W ROOSEVELT ST
TOLLESON AZ 85353
Phone: (602) 462-2414

 Arkansas

Arkansas

 Colorado

Colorado
DELTA RIGGING & TOOLS, INC.
722 SCARLET STREET
GRAND JUNCTION CO 81505
Phone: (970) 242-1144

 

 Georgia

Georgia

DAWSON TARP
2088 ALBANY HWY
DAWSON GA 39842
Phone : (800) 345-7972

 Idaho

Idaho

 Illinois

Illinois

TRI CITY CANVAS PRODUCTS
3240 WEST CHAIN OF ROCKS RD
GRANITE CITY IL 62040
Phone: (618) 797-1662

 Kansas

Kansas

 Nebraska

Nebraska

 Oklahoma

Oklahoma

 Oregon

Oregon

AUTOHAULER SUPPLY
464 N HAYDEN BAY DR
PORTLAND, OR 97217
Phone: (866) 855-4285

 Kentucky

Kentucky

 Tennessee

Tennessee

 Texas

Texas

BARTLEET TRADING INT'L LLC
1990 JORDAN LN
ROCKWALL TX 75032
Phone: (888) 832-8328

EZ TRUCK STORE
130 E Jefferson St. #1728
Van Alstyne, TX 75495
Phone: (855) 866-4639

 Utah

Utah

 Virginia

Virginia

 Washington

Washington

FLEETPRIDE
2626 SO. TACOMA WAY
TACOMA WA 98409
Phone: (888) 358-5026

 Wisconsin

Wisconsin

 Michigan

BUD AND TONY'S TRUCK PARTS
143 EAST POND DR
ROMEO MI 48064
(586) 651-0946

 California

California

CABLECO DONNA
13100 FIRESTONE BLVD.
SANTA FE SPRINGS CA 90670
Phone: (800) 867-9473

KODA ENTERPRISE CO.
1210 FOLKSTONE AVENUE
HACIENDA HEIGHTS CA 91745
Phone: (626) 589-3188

BC WIRE ROPE AND RIGGING
10717 AIRPORT DRIVE
EL CAJON CA 92020
Phone: (619) 270-2030

TARPS & TIE-DOWNS, INC.
17866 VALLEY BLVD #3C
BLOOMINGTON CA 92316
Phone: (909) 746-4188

TEC EQUIPMENT, INC.
16025 SLOVER AVE
FONTANA CA 92337
Phone: (909) 587-7570

MULEPARTS INC.
15624 JOSHUA ST
HESPERIA CA 92345
Phone: (760) 646-7284

BC WIRE ROPE & RIGGING
2720 E. REGAL PARK DR.
ANAHEIM CA 92806
Phone: (714) 666-8000

B&R TOOL & SUPPLY CO.
1711 CALLENS RD
VENTURA CA 93003
Phone: (805) 656-0715

THE TRAILER COMPANY
234 MT. VERNON AVENUE
BAKERSFIELD CA 93307
Phone: (661) 324-7377

CARPENTER RIGGING
222 NAPOLEON ST.
SAN FRANCISCO CA 94124
Phone: (415) 285-1954

BERT WILLIAMS & SONS
525 NO. BAY DRIVE
NAPA CA 94559
Phone: (707) 255-7003

CENTRAL VALLEY BUILDERS SUPPLY
1804 SOSCOL AVE, STE. 205
NAPA CA 94559
Phone: (707) 252-2889

BROWN'S AUTO PARTS
1218 MAIN ST
ST HELENA CA 94574
Phone: (707) 963-3638

CENTRAL VALLEY BUILDERS SUPPLY
1100 VINTAGE AVE
ST HELENA CA 94574
Phone: (707) 963-3622

BERT WILLIAMS & SON
3032 SONOMA BLVD.
VALLEJO CA 94590
Phone: (707) 552-4464

BEARINGS & HYDRAULICS
709 PETALUMA BLVD. SO.
PETALUMA CA 94952
Phone: (707) 765-9667

TARPS & TIE-DOWNS
4884 FRONTIER WAY, STE. B
STOCKTON CA 95215
Phone: (209) 599-2788

LUPER'S TANK & TRAILER
5528 FAITH HOME ROAD
CERES CA 95307
Phone: (209) 531-1454

UTILITY TRAILER
12608 S HARLAN ROAD
LATHROP CA 95330
Phone: (209) 444-8800

ALL RIGGING COMPANY LLC
17800 COMCONEX RD
MANTECA CA 95336
Phone: (209) 649-3002

SANTA ROSA AUTO PARTS JOHN
1110 SANTA ROSA AVENUE
SANTA ROSA CA 95404
Phone: (707) 545-6706

SMOTHERS PARTS INT'L, INC.
2155 SANTA ROSA AVE
SANTA ROSA CA 95407
Phone: (707) 527-7200

CENTRAL VALLEY BUILDERS SUPPLY
160 GRANT AVENUE
HEALDSBURG CA 95448
Phone: (707) 473-9722

OPPERMAN & SON, INC.
280 KINLEY DRIVE
HEALDSBURG CA 95448
Phone: (707) 433-4421

SONOMA AUTO PARTS
19425 SONOMA HWY
SONOMA CA 95476
Phone: (707) 996-8424

ACME RIGGING
3350 NO. STATE ST.
UKIAH CA 95482
Phone: (707) 462-0567

PETERSON TRUCKS, INC.
1700 ALAMAR WAY
FORTUNA CA 95540
Phone: (707) 682-9032

ACME RIGGING
3901 COMMERCE DR
WEST SACRAMENTO CA 95691
Phone: (916) 443-3355

CENTRAL VALLEY BUILDERS SUPPLY
535 NORTH PIONEER AVE
WOODLAND CA 95776
Phone: (530) 666-1200

NORTHGATE CARGO CONTROL
833 N MARKET BLVD
SACRAMENTO CA 95834
Phone: (916) 567-0227

FLEETPRIDE OF REDDING
5756-A WESTSIDE RD.
REDDING CA 96001
Phone: (530) 246-7073

GENERAL TRAILER PARTS, LLC
5875 EASTSIDE ROAD
REDDING CA 96001
Phone: (800) 475-4057

 Nevada

BC WIRE ROPE AND RIGGING
337 WEST COMMERCIAL ST
ELKO NV 89801
(775) 753-8841
BC

British Columbia
ASSOCIATED TRUCKERS SUPPLY INC.
#108 - 44195 YALE ROAD WEST
CHILLIWACK BC V2R 4H2
(604) 795-5700

 AB

Alberta

LINESTAR UTILITY SUPPLY INC.
#1, 1381 HASTINGS CRESENT SE
CALGARY AB T2G 4C8
Phone: (403) 243-1900

GREGG DISTRIBUTORS CO. LTD.
16215 - 118 AVENUE
EDMONTON AB T5V 1C7
Phone: (780) 447-3447

GDL LOGISTIX
15700 - 145 AVENUE NW
EDMONTON AB T6V 0H8
Phone: (780) 473-2900

Upcoming Events

New Products

Now Available!

Trucking

Harvest Bin Corner Iron

Morgan Manufacturing, Inc.

12 Ga. steel construction
34" long x 5" angles

Morgan Manufacturing, Inc.

Heavy duty box hook

WH-1F Hook Fork

WH-1F Hook Fork

For placement of corner irons and cable

WH-1 Harvest Bin Corner Iron Weld on Hooks

WH-1 Harvest Bin Corner Iron Weld on Hooks

Strong steel casting

VB Series Vee Boards & EL-4 Easy Lift

VB-48A 4 foot Aluminum Vee Board with EL-4 Easy Lift

Morgan Manufacturing, Inc.

EL-4 Easy Lift - One lifting stud for VB series slotted Vee Boards

EL-4 Easy Lift designed to fit the new cut out slot in all our VB series aluminum vee boards. EL-4 fits any standard "Broom Handle" style threads for both installing and removing vee boards from the truck loads. Optional 4' - 8' Extension Pole is also available, Part # ELEP-48

FBI-34

FBI-34